600A
View detailed technical data, stock status, and sourcing information for: 600A
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 600A to receive an up to date pricing and availability quote by email.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
mildew resistant motor environmental protection, electric motor prime mover type, 0.750 prime mover horsepower rating, 1 filter quantity, ac/dc current type
Product Characteristics
Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.
- Current Type
- ac/dc
- Filter Quantity
- 1
- Prime Mover Horsepower Rating
- 0.750
- Motor Environmental Protection
- mildew resistant
- Prime Mover Type
- electric motor
- Filter Type
- pressure
- Potable Water Capacity
- 600.00 gallons per hour
- Disinfection Unit Type
- hypochlorinator
- Disinfection Unit Quantity
- 1
- Feed Control Type
- manual
- Maximum Feed Rate
- 2.500 gallons per hour
- Pretreatment Equipment Type
- solids contact clarifier and chemical feeder
- Solid Contact Clarifier Type
- slurry blanket
- Slurry Separation Area In Square Feet
- 11.200
- Total Volume In Gallons
- 245.00
- Manufacturer Name
- met pro,inc
- Manufacturer Identifying Number
- dwg no. d-11076-15-a
- Chemical Feeder Type And Quantity
- 1.0 slurry and 1.0 solution
- Electromagnetic Interference Suppression
- provided
- Voltage In Volts
- 115.00
- Phase
- single
- Frequency In Hertz
- 60.00
Related Parts
This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:
| Part Number | Name |
|---|---|
| 600A | Trailer Water Purification Unit |
FAQs
Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.
What is the FSCG of the NSN 4610-00-726-1237?
Does the NSN 4610-00-726-1237 have a Schedule B code assigned?
Does NSN 4610-00-726-1237 require demilitarization?
Does NSN 4610-00-726-1237 contain precious materials?
Does NSN 4610-00-726-1237 contain hazardous materials?
When the NSN 4610-00-726-1237 was assigned to the Federal Catalog?
Professional Distribution
Certified to meet the strict requirements of defense, aerospace, and hazardous materials distribution.
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- AS9120 Quality Standards
- 100% Quality Inspections
You May Also Like
Browse other in-demand NSN parts sourced by professionals in defense, aerospace, and manufacturing sectors. Each component meets strict standards for quality and performance.
Pricing
Submit your request below and our team will respond quickly with up-to-date pricing, delivery estimates, and stock information:
