7010137

View detailed technical data, stock status, and sourcing information for: 7010137
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 7010137 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5930 Switches

National Stock Number

5930-01-551-7237

Item Name Code

15316

Assigment Date

05/24/2007 (19 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

handle, linear actuator part name assigned by controlling agency, 9.000 inches nominal overall height, press fit mounting method, assault amphibious vehicle aavr7a1 aav ram/rs, 2350-01-458-7550 end item identification, 24.000 inches nominal overall length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 24.000 inches nominal
Overall Height: 9.000 inches nominal
End Item Identification: assault amphibious vehicle aavr7a1 aav ram/rs, 2350-01-458-7550
Mounting Method: press fit
Part Name Assigned By Controlling Agency: handle, linear actuator
Special Features: drive end dimensions shall conform to 0.500 inch nominal male end square drives per astm b107.4;apply id marking by metal stamp, arc pencil, or ink stamp per mil-std-130 with letter height of 0.250 inches;nha is p/n 7003028
Material: steel comp 1023 body
Material Document And Classification: astm a576 assn std single material response body
Surface Treatment Document And Classification: astm b633 assn std single treatment response handle
Style Designator: lever

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
7010137	Switch Handle

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5930-01-551-7237?

The FSCG of the NSN 5930-01-551-7237 is 5930

Does the NSN 5930-01-551-7237 have a Schedule B code assigned?

Yes, the Schedule B code is 8538907080

Does NSN 5930-01-551-7237 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5930-01-551-7237 contain precious materials?

Item does not contain precious metal.

Does NSN 5930-01-551-7237 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5930-01-551-7237 was assigned to the Federal Catalog?

It was assigned 19 years ago, on Thu, May 24, 2007