5305-01-514-0440

Find complete technical information, availability, and procurement data for: 5305-01-514-0440
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5305-01-514-0440 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5305 Screws

National Stock Number

5305-01-514-0440

Item Name Code

29294

Assigment Date

10/15/2003 (22 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.316 inches nominal thread length, 1.269 inches nominal fastener length, 3a thread class, right-hand thread direction, oval countersunk head style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 3a
Thread Direction: right-hand
Thread Length: 0.316 inches nominal
Fastener Length: 1.269 inches nominal
Head Style: oval countersunk
Head Diameter: 0.3898 inches minimum and 0.3948 inches maximum
Grip Diameter: 0.2490 inches minimum and 0.2495 inches maximum
Internal Drive Style: high-torque
End Item Identification: wing aircraft
Nominal Thread Diameter: 0.250 inches
Grip Length: 0.990 inches nominal
Thread Quantity Per Inch: 28
Countersink Angle: 99.0 degrees minimum and 101.0 degrees maximum
Material: steel comp xm-13 overall
Material Document And Classification: ams 5629 assn std single material response overall
Surface Treatment: passivate overall
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response overall
Thread Series Designator: unjf

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
11929-4-15-1	Close Tolerance Screw
ST3M713-4-15-1	Close Tolerance Screw

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5305-01-514-0440?

The FSCG of the NSN 5305-01-514-0440 is 5305

Does the NSN 5305-01-514-0440 have a Schedule B code assigned?

Yes, the Schedule B code is 7318152000

Does NSN 5305-01-514-0440 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5305-01-514-0440 contain precious materials?

Item does not contain precious metal.

Does NSN 5305-01-514-0440 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5305-01-514-0440 was assigned to the Federal Catalog?

It was assigned 22 years ago, on Wed, Oct 15, 2003