5305-01-361-5353

Find complete technical information, availability, and procurement data for: 5305-01-361-5353
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5305-01-361-5353 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5305 Screws

National Stock Number

5305-01-361-5353

Item Name Code

41756

Assigment Date

07/18/1992 (34 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.234 inches minimum and 0.344 inches maximum fastener length, hexagon extended washer head style, 0.384 inches minimum and 0.414 inches maximum extended washer diameter, 0.305 inches minimum and 0.312 inches maximum width between flats, 0.105 inches minimum and 0.120 inches maximum head height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Fastener Length: 0.234 inches minimum and 0.344 inches maximum
Head Style: hexagon extended washer
Head Height: 0.105 inches minimum and 0.120 inches maximum
Width Between Flats: 0.305 inches minimum and 0.312 inches maximum
Extended Washer Diameter: 0.384 inches minimum and 0.414 inches maximum
Extended Washer Thickness: 0.019 inches minimum and 0.031 inches maximum
Internal Drive Style: slot
Nonmachine Thread Style: wide flute (type t)
Nonmachine Nominal Thread Diameter: 0.190 inches
Material: steel overall
Material Document And Classification: gm 6010-m mfr ref single material response overall
Surface Treatment: cadmium overall
Surface Treatment Document And Classification: gm 4341-m mfr ref single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
5305PL0794140	Tapping Screw
9414241	Tapping Screw

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5305-01-361-5353?

The FSCG of the NSN 5305-01-361-5353 is 5305

Does the NSN 5305-01-361-5353 have a Schedule B code assigned?

Yes, the Schedule B code is 7318140000

Does NSN 5305-01-361-5353 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5305-01-361-5353 contain precious materials?

Item does not contain precious metal.

Does NSN 5305-01-361-5353 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5305-01-361-5353 was assigned to the Federal Catalog?

It was assigned 34 years ago, on Sat, Jul 18, 1992