720209-625

View detailed technical data, stock status, and sourcing information for: 720209-625
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 720209-625 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5305 Screws

National Stock Number

5305-01-243-7364

Item Name Code

16282

Assigment Date

10/31/1986 (39 years ago)

A circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see disk, rupturable. For items made of felt, see felt, mechanical, preformed. For metallic or plastic items with a laminated cross section, see shim. Excludes:diaphragm, valve, flat; diaphragm, valve, special shaped; disk, valve, nonmetallic; filtering disk fluid; and insulator, disk.

0.422 inches minimum and 0.516 inches maximum thread length, 3a thread class, right-hand thread direction, 0.484 inches minimum and 0.516 inches maximum fastener length, flat countersunk head style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 3a
Thread Direction: right-hand
Thread Length: 0.422 inches minimum and 0.516 inches maximum
Fastener Length: 0.484 inches minimum and 0.516 inches maximum
Head Style: flat countersunk
Head Diameter: 0.359 inches minimum and 0.411 inches maximum
Internal Drive Style: hexagon
Nominal Thread Diameter: 0.190 inches
Width Across Flats: 0.125 inches minimum and 0.127 inches maximum
Thread Quantity Per Inch: 32
Minimum Tensile Strength: 75000 pounds per square inch
Hardness Rating: 80.0 rockwell b minimum overall
Minimum Yield Strength: 30000 pounds per square inch
Countersink Angle: 80.0 degrees minimum and 82.0 degrees maximum
Material: steel comp 301 or steel comp 302 or steel comp 302b or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 overall
Surface Treatment: passivate overall
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response overall
Thread Series Designator: unf

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
720209-625	Socket Head Cap Screw

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5305-01-243-7364?

The FSCG of the NSN 5305-01-243-7364 is 5305

Does the NSN 5305-01-243-7364 have a Schedule B code assigned?

Yes, the Schedule B code is 7318152000

Does NSN 5305-01-243-7364 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5305-01-243-7364 contain precious materials?

Item does not contain precious metal.

Does NSN 5305-01-243-7364 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5305-01-243-7364 was assigned to the Federal Catalog?

It was assigned 39 years ago, on Fri, Oct 31, 1986