9330-01-541-5374

Find complete technical information, availability, and procurement data for: 9330-01-541-5374
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 9330-01-541-5374 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Nonmetallic Fabricated Materials

Federal Supply Classification

9330 Plastics Fabricated Materials

National Stock Number

9330-01-541-5374

Item Name Code

39096

Assigment Date

06/29/2006 (20 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

24.000 inches nominal length, 80.0 nominal rockwell m nonmetallic hardness rating, cast fabrication method, 11000 pounds per square inch minimum tensile strength, circular cross-sectional shape style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: circular
Fabrication Method: cast
Nonmetallic Hardness Rating: 80.0 nominal rockwell m
Minimum Tensile Strength: 11000 pounds per square inch
Length: 24.000 inches nominal
Surface Condition: unable to decode
Cross Section Outside Diameter: 2.000 inches nominal
Strengthening Feature Material: unable to decode
Strengthening Feature: filler
End Item Identification: nuclear power plants
Part Name Assigned By Controlling Agency: nylatron gsm rod
Material: plastic polyhexamethylene adipamide
Material Document And Classification: l-p-410 fed spec 1st material response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
NYLATRON GSM, 2.0 IN DIA	Plastic Round Section

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 9330-01-541-5374?

The FSCG of the NSN 9330-01-541-5374 is 9330

Does the NSN 9330-01-541-5374 have a Schedule B code assigned?

Yes, the Schedule B code is 3926909988

Does NSN 9330-01-541-5374 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 9330-01-541-5374 contain precious materials?

Item does not contain precious metal.

Does NSN 9330-01-541-5374 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 9330-01-541-5374 was assigned to the Federal Catalog?

It was assigned 20 years ago, on Thu, Jun 29, 2006