9330-01-502-4462

Find complete technical information, availability, and procurement data for: 9330-01-502-4462
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 9330-01-502-4462 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Nonmetallic Fabricated Materials

Federal Supply Classification

9330 Plastics Fabricated Materials

National Stock Number

9330-01-502-4462

Item Name Code

19975

Assigment Date

11/06/2002 (23 years ago)

A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also stud, locked in.

4.000 inches nominal thickness, not fire retarding fire retarding characteristic, 16.660 inches nominal width, aircraft, thunderbolt ii, a-10 end item identification, 20.890 inches nominal length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Fire Retarding Characteristic: not fire retarding
Width: 16.660 inches nominal
Thickness: 4.000 inches nominal
Length: 20.890 inches nominal
End Item Identification: aircraft, thunderbolt ii, a-10
Surface Condition: rough
Density Rating: 1.2 pounds per cubic foot
Compression Strength At 25 Pct Deflection: 0.35 pounds per square inch minimum
Part Name Assigned By Controlling Agency: filler foam
Special Features: "rectangular; right/short edge has 2 cutouts: 1.25wx2.70h at bottom corner & 1.25wx3.66h at top right corner & a crosswise groove:1.25wx1.70h along right edge; top edge is tapered 0.76 at near side; far side has cutout: 4.10wx7.35hx1.80d in upper right corner (far side up) & lengthwise grooves: 1.68wx1.76d along top edge & 2.70wx1.76d along bottom edge & is marked "up aft" in upper left corner & with part number centered above bottom groove"
Material: plastic polyurethane
Supplementary Features: material to be reticulated foam per sm-alc specification ms-mmrs-87-100

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
160D950827-313	Cellular Plastic Material

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 9330-01-502-4462?

The FSCG of the NSN 9330-01-502-4462 is 9330

Does the NSN 9330-01-502-4462 have a Schedule B code assigned?

Yes, the Schedule B code is 3921190000

Does NSN 9330-01-502-4462 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 9330-01-502-4462 contain precious materials?

Item does not contain precious metal.

Does NSN 9330-01-502-4462 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 9330-01-502-4462 was assigned to the Federal Catalog?

It was assigned 23 years ago, on Wed, Nov 6, 2002