5330-00-936-6123

Find complete technical information, availability, and procurement data for: 5330-00-936-6123
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5330-00-936-6123 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-936-6123

Item Name Code

04214

Assigment Date

03/08/1967 (59 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.297 inches minimum and 0.328 inches maximum seal width, 1.001 inches minimum and 1.005 inches maximum housing bore diameter, square case style, 0.375 inches nominal accommodated shaft diameter, 688 feet per minute accommodated shaft maximum rated speed

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Accommodated Shaft Diameter: 0.375 inches nominal
Seal Width: 0.297 inches minimum and 0.328 inches maximum
Accommodated Shaft Maximum Rated Speed: 688 feet per minute
Case Style: square
Housing Bore Diameter: 1.001 inches minimum and 1.005 inches maximum
Sealing Element Style: angular
Material: rubber synthetic sealing element

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-936-6123?

The FSCG of the NSN 5330-00-936-6123 is 5330

Does the NSN 5330-00-936-6123 have a Schedule B code assigned?

Yes, the Schedule B code is 8484200000

Does NSN 5330-00-936-6123 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-936-6123 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-936-6123 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-936-6123 was assigned to the Federal Catalog?

It was assigned 59 years ago, on Wed, Mar 8, 1967