EA2537

View detailed technical data, stock status, and sourcing information for: EA2537
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part EA2537 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-700-5206

Item Name Code

04522

Assigment Date

01/01/1963 (63 years ago)

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1.750 inches nominal center to center distance between bolt holes along width, solid single or composition cross-sectional shape style, 0.281 inches nominal hole diameter, 4.250 inches nominal overall length, 2.250 inches nominal overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: solid single or composition
Hole Diameter: 0.281 inches nominal
Overall Length: 4.250 inches nominal
Overall Width: 2.250 inches nominal
Center To Center Distance Between Bolt Holes Along Width: 1.750 inches nominal
Center To Center Distance Between Bolt Holes Along Length: 3.500 inches nominal
Outside Edge To Bolt Hole Center Distance Along Width: 0.250 inches nominal
Outside Edge To Bolt Hole Center Distance Along Length: 0.375 inches nominal
Cross-Sectional Thickness: 0.010 inches minimum and 0.015 inches maximum
Bolt Hole Quantity: 4
Material: paper and glue overall
Material Document And Classification: mil-g-12803,no. +3313-b mil spec all material responses overall
Style Designator: non-circular

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
608241	Gasket
7005206	Gasket
EA2537	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-700-5206?

The FSCG of the NSN 5330-00-700-5206 is 5330

Does NSN 5330-00-700-5206 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-700-5206 contain precious materials?

Item does not contain precious metal.

Does NSN 5330-00-700-5206 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-700-5206 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963