M7204E100PC19

View detailed technical data, stock status, and sourcing information for: M7204E100PC19
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part M7204E100PC19 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-607-0617

Item Name Code

20856

Assigment Date

01/30/1975 (51 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

65.0 minimum shore durometer a and 75.0 maximum shore durometer a nonmetallic hardness rating, circular cross-sectional shape style, 0.268 inches minimum and 0.282 inches maximum cross section outside diameter, 110.200 inches nominal length, rubber butadiene-acrylonitrile class nbr material

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: circular
Nonmetallic Hardness Rating: 65.0 minimum shore durometer a and 75.0 maximum shore durometer a
Length: 110.200 inches nominal
Cross Section Outside Diameter: 0.268 inches minimum and 0.282 inches maximum
Material: rubber butadiene-acrylonitrile class nbr
Material Document And Classification: mil-std-417 grade sb720 mil spec single material response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
M7201A063-2	Rubber Round Section
M7204E100PC19	Rubber Round Section

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-607-0617?

The FSCG of the NSN 5330-00-607-0617 is 5330

Does the NSN 5330-00-607-0617 have a Schedule B code assigned?

Yes, the Schedule B code is 3926904500

Does NSN 5330-00-607-0617 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-607-0617 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-607-0617 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-607-0617 was assigned to the Federal Catalog?

It was assigned 51 years ago, on Thu, Jan 30, 1975