5310-01-340-5083

Find complete technical information, availability, and procurement data for: 5310-01-340-5083
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-340-5083 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-340-5083

Item Name Code

01869

Assigment Date

05/24/2006 (20 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.735 inches minimum and 0.745 inches maximum internal straight key width, 4.460 inches minimum and 4.480 inches maximum outside diameter, 1 internal key quantity, 1.061 inches nominal distance from centerline to top of internal key, 2.876 inches minimum and 2.882 inches maximum hole diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 2.876 inches minimum and 2.882 inches maximum
Outside Diameter: 4.460 inches minimum and 4.480 inches maximum
Internal Straight Key Width: 0.735 inches minimum and 0.745 inches maximum
Distance From Centerline To Top Of Internal Key: 1.061 inches nominal
Internal Key Quantity: 1
Material Thickness: 0.030 inches minimum and 0.050 inches maximum
Material: steel comp 302 or steel comp 304 overall
Surface Treatment: passivate overall
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response overall
Style Designator: key

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
7572620-001	Key Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-340-5083?

The FSCG of the NSN 5310-01-340-5083 is 5310

Does the NSN 5310-01-340-5083 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-01-340-5083 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-340-5083 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-340-5083 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-340-5083 was assigned to the Federal Catalog?

It was assigned 20 years ago, on Wed, May 24, 2006