5310-01-305-3848

Find complete technical information, availability, and procurement data for: 5310-01-305-3848
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-305-3848 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-305-3848

Item Name Code

01855

Assigment Date

08/04/1989 (37 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2b thread class, right-hand thread direction, 0.594 inches nominal nut height, 0.563 inches nominal width across flats, cap nut style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 2b
Thread Direction: right-hand
Nut Style: cap
Nut Height: 0.594 inches nominal
Width Across Flats: 0.563 inches nominal
Thread Series: unf
Thread Quantity Per Inch: 20
Nominal Thread Size: 0.438 inches
Bearing Surface Type: chamfered
Special Features: chemical and physical test reports required
Material: steel comp 316 overall
Material Document And Classification: qq-s-763 fed spec single material response overall
Surface Treatment: passivate overall
Test Data Document: "81348-qq-s-763 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
04771605	Cap Plain Nut
R04831300 PIECE 7	Cap Plain Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-305-3848?

The FSCG of the NSN 5310-01-305-3848 is 5310

Does the NSN 5310-01-305-3848 have a Schedule B code assigned?

Yes, the Schedule B code is 7318160000

Does NSN 5310-01-305-3848 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-305-3848 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-305-3848 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-305-3848 was assigned to the Federal Catalog?

It was assigned 37 years ago, on Fri, Aug 4, 1989