5310-01-292-9568

Find complete technical information, availability, and procurement data for: 5310-01-292-9568
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-292-9568 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-292-9568

Item Name Code

05279

Assigment Date

01/24/1989 (37 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.375 inches nominal mating member diameter accommodated, 6 gripping notch quantity, stamped nut style, 0.135 inches minimum and 0.155 inches maximum nut height, 0.551 inches minimum and 0.562 inches maximum width across flats

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Mating Member Diameter Accommodated: 0.375 inches nominal
Nut Style: stamped
Nut Height: 0.135 inches minimum and 0.155 inches maximum
Gripping Notch Quantity: 6
Width Across Flats: 0.551 inches minimum and 0.562 inches maximum
Part Name Assigned By Controlling Agency: nut,stamped
Material Document And Classification: 66 fed std all material responses overall
Surface Treatment: zinc overall
Nondefinitive Spec/Std Data: zn finish
Departure From Cited Document: as modified by surface treatment

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-292-9568?

The FSCG of the NSN 5310-01-292-9568 is 5310

Does NSN 5310-01-292-9568 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-292-9568 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-292-9568 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-292-9568 was assigned to the Federal Catalog?

It was assigned 37 years ago, on Tue, Jan 24, 1989