5310-01-213-3666

Find complete technical information, availability, and procurement data for: 5310-01-213-3666
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-213-3666 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-213-3666

Item Name Code

06158

Assigment Date

07/25/1985 (41 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.380 inches minimum and 0.390 inches maximum hole diameter, 0.148 inches minimum and 0.188 inches maximum internal keyway width, 0.227 inches minimum and 0.238 inches maximum distance from centerline to bottom of internal keyway, 0.238 inches minimum and 0.248 inches maximum material thickness, 0.615 inches minimum and 0.635 inches maximum outside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.380 inches minimum and 0.390 inches maximum
Outside Diameter: 0.615 inches minimum and 0.635 inches maximum
Internal Keyway Width: 0.148 inches minimum and 0.188 inches maximum
Distance From Centerline To Bottom Of Internal Keyway: 0.227 inches minimum and 0.238 inches maximum
Material Thickness: 0.238 inches minimum and 0.248 inches maximum
Special Features: four equally spaced keyways
Material: aluminum alloy 2024 overall
Material Document And Classification: qq-a-250/4,t4 fed spec single material response or qq-a-250/5,t4 fed spec single material response overall
Surface Treatment: anodize overall
Surface Treatment Document And Classification: mil-a-8625 mil spec single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
MS21126-6	Keyway Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-213-3666?

The FSCG of the NSN 5310-01-213-3666 is 5310

Does the NSN 5310-01-213-3666 have a Schedule B code assigned?

Yes, the Schedule B code is 7616108000

Does NSN 5310-01-213-3666 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-213-3666 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-213-3666 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-213-3666 was assigned to the Federal Catalog?

It was assigned 41 years ago, on Thu, Jul 25, 1985