5310-01-153-9303

Find complete technical information, availability, and procurement data for: 5310-01-153-9303
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-153-9303 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-153-9303

Item Name Code

01869

Assigment Date

05/18/1983 (43 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.812 inches nominal outside diameter, 0.063 inches nominal material thickness, 0.410 inches nominal distance from centerline to inside of prebent key, 0.575 inches minimum and 0.585 inches maximum hole diameter, 0.180 inches nominal external prebent key length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.575 inches minimum and 0.585 inches maximum
Outside Diameter: 0.812 inches nominal
External Prebent Key Length: 0.180 inches nominal
Distance From Centerline To Inside Of Prebent Key: 0.410 inches nominal
Material Thickness: 0.063 inches nominal
Wire Hole Diameter: 0.062 inches minimum and 0.072 inches maximum
External Prebent Key Angle: 43.0 degrees minimum and 47.0 degrees maximum
Special Features: inside dia flatted top 0.030 in. radius
Material: aluminum alloy 7075 overall
Material Document And Classification: qq-a-250/13,temper o fed spec single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10109835	Key Washer
74A800862-2001	Key Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-153-9303?

The FSCG of the NSN 5310-01-153-9303 is 5310

Does the NSN 5310-01-153-9303 have a Schedule B code assigned?

Yes, the Schedule B code is 7616108000

Does NSN 5310-01-153-9303 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-153-9303 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-153-9303 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-153-9303 was assigned to the Federal Catalog?

It was assigned 43 years ago, on Wed, May 18, 1983