10109367

View detailed technical data, stock status, and sourcing information for: 10109367
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 10109367 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-120-5130

Item Name Code

01869

Assigment Date

10/20/1981 (44 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.063 inches nominal material thickness, 0.169 inches minimum and 0.179 inches maximum internal straight key width, 1.060 inches nominal hole diameter, 0.310 inches nominal external prebent key length, 0.250 inches nominal external prebent key width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 1.060 inches nominal
External Prebent Key Length: 0.310 inches nominal
External Prebent Key Width: 0.250 inches nominal
Internal Straight Key Width: 0.169 inches minimum and 0.179 inches maximum
Material Thickness: 0.063 inches nominal
Minimum Tensile Strength: 150000 pounds per square inch
Distance From Key Center To Wire Hole Center: 0.120 inches nominal
Wire Hole Diameter: 0.062 inches nominal
External Prebent Key Angle: 15.0 degrees nominal
Special Features: one internal prebent key; three external prebent keys
Material: steel comp 4130 overall
Material Document And Classification: mil-s-18729,cond n mil spec single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10109367	Key Washer
74A410630-2003	Key Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-120-5130?

The FSCG of the NSN 5310-01-120-5130 is 5310

Does the NSN 5310-01-120-5130 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-01-120-5130 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-120-5130 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-120-5130 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-120-5130 was assigned to the Federal Catalog?

It was assigned 44 years ago, on Tue, Oct 20, 1981