AS9582-18

View detailed technical data, stock status, and sourcing information for: AS9582-18
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part AS9582-18 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-107-4166

Item Name Code

01869

Assigment Date

02/05/1981 (45 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.890 inches minimum and 0.895 inches maximum hole diameter, 0.150 inches minimum and 0.160 inches maximum external prebent key length, 1.245 inches minimum and 1.255 inches maximum outside diameter, 0.260 inches minimum and 0.265 inches maximum external prebent key width, 0.600 inches minimum and 0.610 inches maximum external tapered key width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.890 inches minimum and 0.895 inches maximum
Outside Diameter: 1.245 inches minimum and 1.255 inches maximum
External Prebent Key Length: 0.150 inches minimum and 0.160 inches maximum
External Tapered Key Width: 0.600 inches minimum and 0.610 inches maximum
External Prebent Key Width: 0.260 inches minimum and 0.265 inches maximum
Distance From Centerline To Inside Of Prebent Key: 0.790 inches minimum and 0.800 inches maximum
Material Thickness: 0.032 inches minimum and 0.040 inches maximum
Angle Between External Keys: 88.0 degrees minimum and 92.0 degrees maximum
External Prebent Key Angle: 15.0 degrees nominal
Material: steel comp 321 overall
Material Document And Classification: ams 5510 assn std single material response overall
Style Designator: 270 degree locking key

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
AS9582-18	Key Washer
MS9582-18	Key Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-107-4166?

The FSCG of the NSN 5310-01-107-4166 is 5310

Does the NSN 5310-01-107-4166 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-01-107-4166 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-107-4166 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-107-4166 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-107-4166 was assigned to the Federal Catalog?

It was assigned 45 years ago, on Thu, Feb 5, 1981