5310-01-081-0148

Find complete technical information, availability, and procurement data for: 5310-01-081-0148
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-081-0148 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-081-0148

Item Name Code

15887

Assigment Date

08/07/1979 (47 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.070 inches nominal drive point depth, 0.580 inches minimum and 0.600 inches maximum small end diameter, 3b thread class, 0.730 inches minimum and 0.740 inches maximum nut diameter, round nut style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 3b
Small End Diameter: 0.580 inches minimum and 0.600 inches maximum
Drive Point Depth: 0.070 inches nominal
Nut Style: round
Nut Diameter: 0.730 inches minimum and 0.740 inches maximum
Nut Thickness: 0.364 inches minimum and 0.374 inches maximum
Drive Point Width: 0.115 inches minimum and 0.120 inches maximum
Undercut Thickness: 0.020 inches minimum and 0.040 inches maximum
Thread Series: unjf
Thread Quantity Per Inch: 24
Nominal Thread Size: 0.375 inches
Countersink Angle: 118.0 degrees minimum and 122.0 degrees maximum nut
Material: steel overall
Surface Treatment: oxide overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
4067T06P01	Round Plain Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-081-0148?

The FSCG of the NSN 5310-01-081-0148 is 5310

Does the NSN 5310-01-081-0148 have a Schedule B code assigned?

Yes, the Schedule B code is 7318160000

Does NSN 5310-01-081-0148 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-081-0148 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-081-0148 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-081-0148 was assigned to the Federal Catalog?

It was assigned 47 years ago, on Tue, Aug 7, 1979