9174611-2

View detailed technical data, stock status, and sourcing information for: 9174611-2
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 9174611-2 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-053-1934

Item Name Code

15893

Assigment Date

12/31/1977 (48 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.099 inches minimum and 0.111 inches maximum pilot length, 0.220 inches minimum and 0.224 inches maximum pilot diameter, prevailing torque with nonmetallic insert locking feature, right-hand thread direction, 3b thread class

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 3b
Thread Direction: right-hand
Locking Feature: prevailing torque with nonmetallic insert
Pilot Diameter: 0.220 inches minimum and 0.224 inches maximum
Pilot Length: 0.099 inches minimum and 0.111 inches maximum
Nut Style: spline
Nut Height: 0.287 inches minimum and 0.299 inches maximum
Width Across Flats: 0.302 inches minimum and 0.322 inches maximum
Temp Rating: 250.0 fahrenheit nominal
Thread Series: unc
Thread Quantity Per Inch: 32
Nominal Thread Size: 0.138 inches
Material: plastic polyamide (nylon) locking insert
Material: steel comp 303se nut
Material Document And Classification: 66 fed std single material response nut
Surface Treatment: passivate nut

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5310-00-596-6466	No Name Available	08/09/1991

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
1486133-9	Spline Self-Locking Nut
203-1163P10	Spline Self-Locking Nut
203MS012P009	Spline Self-Locking Nut
2052912-8	Spline Self-Locking Nut
33C821-008	Spline Self-Locking Nut
79NC3-62	Spline Self-Locking Nut
9174611-2	Spline Self-Locking Nut
M45938/8-2C	Spline Self-Locking Nut
S0026	Spline Self-Locking Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-053-1934?

The FSCG of the NSN 5310-01-053-1934 is 5310

Does the NSN 5310-01-053-1934 have a Schedule B code assigned?

Yes, the Schedule B code is 7318160000

Does NSN 5310-01-053-1934 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-053-1934 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-053-1934 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-053-1934 was assigned to the Federal Catalog?

It was assigned 48 years ago, on Sat, Dec 31, 1977