5310-01-043-6347

Find complete technical information, availability, and procurement data for: 5310-01-043-6347
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-043-6347 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-043-6347

Item Name Code

15886

Assigment Date

06/27/1977 (49 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

right-hand thread direction, knurled nut style, 0.375 inches nominal small end diameter, 2b thread class, 0.245 inches minimum and 0.253 inches maximum nut counterbore diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 2b
Thread Direction: right-hand
Counterbore Diameter: 0.245 inches minimum and 0.253 inches maximum nut
Small End Diameter: 0.375 inches nominal
Nut Style: knurled
Nut Diameter: 0.315 inches minimum and 0.322 inches maximum
Nut Thickness: 0.485 inches nominal
Knurl Width: 0.035 inches nominal
Small End Length: 0.440 inches nominal
Nut Counterbore Depth: 0.295 inches nominal nut
Thread Series: unc
Thread Quantity Per Inch: 32
Nominal Thread Size: 0.138 inches
Countersink Angle: 90.0 degrees nominal nut
Material: steel comp 1215 overall
Surface Treatment: zinc overall
Surface Treatment Document And Classification: qq-z-325,type 2,class 1 fed spec single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
8004519-4	Knurled Plain Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-043-6347?

The FSCG of the NSN 5310-01-043-6347 is 5310

Does the NSN 5310-01-043-6347 have a Schedule B code assigned?

Yes, the Schedule B code is 7318160000

Does NSN 5310-01-043-6347 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-043-6347 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-043-6347 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-043-6347 was assigned to the Federal Catalog?

It was assigned 49 years ago, on Mon, Jun 27, 1977