5310-01-037-1622

Find complete technical information, availability, and procurement data for: 5310-01-037-1622
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-037-1622 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-037-1622

Item Name Code

15887

Assigment Date

03/14/1977 (49 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

right-hand thread direction, round nut style, 6.500 inches nominal nut diameter, 0.250 inches nominal drive point depth, +5.7083 to 5.7191 inches thread pitch diameters

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Pitch Diameters: +5.7083 to 5.7191 inches
Thread Direction: right-hand
Drive Point Depth: 0.250 inches nominal
Nut Style: round
Nut Diameter: 6.500 inches nominal
Nut Thickness: 1.000 inches nominal
Drive Point Width: 0.500 inches minimum and 0.520 inches maximum
Drive Point Quantity: 6
Thread Series: acme
Thread Quantity Per Inch: 12
Hardness Rating: 30.0 rockwell c minimum and 34.0 rockwell c maximum
Nominal Thread Size: 5.750 inches
Special Features: two 0.060 holes placed on 45 degree angle 180 degree from one other on perifery of nut. hole center located 0.190 inches from slotted side of nut
Material: steel comp 4130 or steel comp 4140 overall
Surface Treatment: cadmium overall
Surface Treatment Document And Classification: qq-p-416,ty 2,cl 3 fed spec single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
12007649	Round Plain Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-037-1622?

The FSCG of the NSN 5310-01-037-1622 is 5310

Does the NSN 5310-01-037-1622 have a Schedule B code assigned?

Yes, the Schedule B code is 7318160000

Does NSN 5310-01-037-1622 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-037-1622 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-037-1622 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-037-1622 was assigned to the Federal Catalog?

It was assigned 49 years ago, on Mon, Mar 14, 1977