6435-20179-101

View detailed technical data, stock status, and sourcing information for: 6435-20179-101
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 6435-20179-101 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-900-3368

Item Name Code

15933

Assigment Date

02/10/1967 (59 years ago)

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

150000 pounds per square inch minimum tensile strength, 0.505 inches minimum and 0.510 inches maximum hole diameter, 1.240 inches minimum and 1.260 inches maximum outside diameter, 34.0 rockwell c minimum and 38.0 rockwell c maximum hardness rating, 0.177 inches minimum and 0.180 inches maximum material thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.505 inches minimum and 0.510 inches maximum
Outside Diameter: 1.240 inches minimum and 1.260 inches maximum
Material Thickness: 0.177 inches minimum and 0.180 inches maximum
Minimum Tensile Strength: 150000 pounds per square inch
Hardness Rating: 34.0 rockwell c minimum and 38.0 rockwell c maximum
Top Recess Diameter: 0.604 inches minimum and 0.620 inches maximum
Bottom Recess Angle: 90.0 degrees nominal
Top Recess Angle: 90.0 degrees nominal
Criticality Code Justification: feat
Bottom Recess Diameter: 0.604 inches minimum and 0.620 inches maximum
Surface Finish: 100.0 microinches all surfaces
Special Features: extereme outer edges ofboth bearing surfaces rounded
Material: steel overall
Material Document And Classification: mil-s-5000 mil spec single material response overall
Surface Treatment: cadmium overall
Surface Treatment Document And Classification: qq-p-416 fed spec single treatment response overall
Style Designator: recessed both sides

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
6435-20179-101	Recessed Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-900-3368?

The FSCG of the NSN 5310-00-900-3368 is 5310

Does the NSN 5310-00-900-3368 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-00-900-3368 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-900-3368 contain precious materials?

Precious metal content is unknown

Does NSN 5310-00-900-3368 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-900-3368 was assigned to the Federal Catalog?

It was assigned 59 years ago, on Fri, Feb 10, 1967