5310-00-482-4417

Find complete technical information, availability, and procurement data for: 5310-00-482-4417
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-00-482-4417 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-482-4417

Item Name Code

13393

Assigment Date

02/01/1971 (55 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

round peripheral shape style, rectangular center hole shape style, 0.056 inches minimum and 0.068 inches maximum thickness, rectangular cross-sectional shape style, 0.740 inches minimum and 0.760 inches maximum overall diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: rectangular
Peripheral Shape Style: round
Center Hole Shape Style: rectangular
Thickness: 0.056 inches minimum and 0.068 inches maximum
Overall Diameter: 0.740 inches minimum and 0.760 inches maximum
Center Hole Length: 0.360 inches minimum and 0.370 inches maximum
Center Hole Width: 0.360 inches minimum and 0.370 inches maximum
Part Name Assigned By Controlling Agency: navy special project
Material: steel comp 1010 overall
Material Document And Classification: aisi assn std single material response overall
Surface Treatment: zinc or dichromate overall
Surface Treatment Document And Classification: p-44-e fscm 16764 mfr ref 1st treatment response or p-10-c fscm 16764 mfr ref 2nd treatment response overall

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-482-4417?

The FSCG of the NSN 5310-00-482-4417 is 5310

Does the NSN 5310-00-482-4417 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-00-482-4417 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-482-4417 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-00-482-4417 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-482-4417 was assigned to the Federal Catalog?

It was assigned 55 years ago, on Mon, Feb 1, 1971