5310-00-404-5077

Find complete technical information, availability, and procurement data for: 5310-00-404-5077
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-00-404-5077 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-404-5077

Item Name Code

15933

Assigment Date

08/08/1969 (57 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

99.0 degrees minimum and 101.0 degrees maximum recess angle, 0.080 inches minimum and 0.100 inches maximum material thickness, 0.540 inches minimum and 0.580 inches maximum outside diameter, 0.390 inches minimum and 0.410 inches maximum recess diameter, 0.218 inches minimum and 0.224 inches maximum hole diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.218 inches minimum and 0.224 inches maximum
Outside Diameter: 0.540 inches minimum and 0.580 inches maximum
Recess Diameter: 0.390 inches minimum and 0.410 inches maximum
Material Thickness: 0.080 inches minimum and 0.100 inches maximum
Recess Angle: 99.0 degrees minimum and 101.0 degrees maximum
Material: steel comp 1020 overall
Material Document And Classification: ams 5045 assn std single material response overall
Surface Treatment: cadmium overall
Surface Treatment Document And Classification: ams 2400 assn std single treatment response overall
Style Designator: recessed

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
9654M29P01	Recessed Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-404-5077?

The FSCG of the NSN 5310-00-404-5077 is 5310

Does NSN 5310-00-404-5077 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-404-5077 contain precious materials?

Precious metal content is unknown

Does NSN 5310-00-404-5077 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-404-5077 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Fri, Aug 8, 1969