FC17755

View detailed technical data, stock status, and sourcing information for: FC17755
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part FC17755 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-314-0764

Item Name Code

15938

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.584 inches minimum and 0.604 inches maximum hole diameter, steel overall material, 0.005 inches minimum and 0.015 inches maximum material thickness, 0.115 inches minimum and 0.135 inches maximum overall height, 0.865 inches minimum and 0.885 inches maximum outside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.584 inches minimum and 0.604 inches maximum
Outside Diameter: 0.865 inches minimum and 0.885 inches maximum
Overall Height: 0.115 inches minimum and 0.135 inches maximum
Material Thickness: 0.005 inches minimum and 0.015 inches maximum
Material: steel overall
Surface Treatment: cadmium and chromate overall
Surface Treatment Document And Classification: qq-p-416,ty 2,cl 3 fed spec single treatment response overall

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5310-00-141-3135	No Name Available	01/01/1977

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
3502-26	Spring Tension Washer
8733935	Spring Tension Washer
FC17755	Spring Tension Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-314-0764?

The FSCG of the NSN 5310-00-314-0764 is 5310

Does the NSN 5310-00-314-0764 have a Schedule B code assigned?

Yes, the Schedule B code is 7318210000

Does NSN 5310-00-314-0764 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-314-0764 contain precious materials?

Precious metal content is unknown

Does NSN 5310-00-314-0764 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-314-0764 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963