91793094

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

leadframe material, copper alloy; dimensions are in inches (millimeters); dimension does not include moldflash of 0.15mm per side; dimension does not include moldflash of 0.25mm per side; all ground leads and ground paddle must be soldered to pcb rf ground; this item is a low-cost spdt switch in 8-lead grounded base msop packages; the desigm has been optimized to provide high isolation with minimal insertion loss for medium and low power applications; on-chip circuitry allows positive voltage control operation at very low dc currents with control inputs compatible with cmos and most ttl logic families special features, low stress injection molded plastic part name assigned by controlling agency