5340-01-695-6404

Find complete technical information, availability, and procurement data for: 5340-01-695-6404
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-695-6404 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-695-6404

Item Name Code

77777

Assigment Date

06/16/2021 (5 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

almds contain end item identification, hole type and quantity consists of the following:qty 8 thru holes 0.256 maximum inches;qty 12 thru holes 1.000 maximum inches;qty 20 thru holes 3.960 maximum inches;nha 8601153; special features, cradle base,outer part name assigned by controlling agency

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

End Item Identification: almds contain
Part Name Assigned By Controlling Agency: cradle base,outer
Special Features: hole type and quantity consists of the following:qty 8 thru holes 0.256 maximum inches;qty 12 thru holes 1.000 maximum inches;qty 20 thru holes 3.960 maximum inches;nha 8601153;

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
8601159-1	Base Outer Cradle
8601159/DASH NO.1	Base Outer Cradle

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-695-6404?

The FSCG of the NSN 5340-01-695-6404 is 5340

Does NSN 5340-01-695-6404 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-695-6404 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-695-6404 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-695-6404 was assigned to the Federal Catalog?

It was assigned 5 years ago, on Wed, Jun 16, 2021