5340-01-620-5699

Find complete technical information, availability, and procurement data for: 5340-01-620-5699
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-620-5699 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-620-5699

Item Name Code

16900

Assigment Date

07/30/2013 (13 years ago)

A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.

3.880 inches nominal second leg length, 0.880 inches nominal first leg length, 3.250 inches nominal second leg width, 2350-01-369-6082 end item identification, plain mounting hole type

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Mounting Hole Type: plain
First Leg Length: 0.880 inches nominal
Second Leg Length: 3.880 inches nominal
End Item Identification: 2350-01-369-6082
Second Leg Width: 3.250 inches nominal
First Leg Hole Diameter: 0.436 inches minimum and 0.453 inches maximum
Second Leg Distance Between Hole Centers Along Width: 2.375 inches nominal
Second Leg Distance From Edge To Hole Center Along Width: 0.4375 inches nominal
Second Leg Distance From Edge To Hole Center Along Length: 0.656 inches nominal
Second Leg Slot Length: 0.500 inches nominal
Second Leg Slot Width: 0.312 inches nominal
First Leg Thickness: 0.065 inches nominal
Second Leg Thickness: 0.065 inches nominal
First Leg Width: 1.090 inches nominal
First Leg End Width: 0.070 inches minimum and 1.030 inches maximum
First Leg Distance From Edge To Hole Center Along Width: 0.540 inches nominal
First Leg Distance From Edge To Hole Center Along Length: 0.440 inches nominal
First Leg Style: chamfered ends
First Leg Hole Arrangement Style: one hole
Second Leg Style: cut out
Second Leg Hole Arrangement Style: 2 slots
Second Leg Relationship To First Leg: not identical
First Leg Angle: 0.090 radians nominal
Second Leg Cutout Length: 0.750 inches nominal
Second Leg Cutout Width: 1.125 inches nominal
First Leg Chamfer Angle: 40.0 degrees minimum and 50.0 degrees maximum
Part Name Assigned By Controlling Agency: bracket, electrical connector
Special Features: two 0.164 inch mounting holes in second leg
Material: steel
Material Document And Classification: astma569 assn std single material response
Surface Treatment: cadmium
Surface Treatment Document And Classification: qq-p-416 assn std single treatment response
Style Designator: angle

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
12350068	Angle Bracket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-620-5699?

The FSCG of the NSN 5340-01-620-5699 is 5340

Does the NSN 5340-01-620-5699 have a Schedule B code assigned?

Yes, the Schedule B code is 8302500000

Does NSN 5340-01-620-5699 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-620-5699 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-620-5699 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-620-5699 was assigned to the Federal Catalog?

It was assigned 13 years ago, on Tue, Jul 30, 2013