5340-01-599-3123

Find complete technical information, availability, and procurement data for: 5340-01-599-3123
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-599-3123 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-599-3123

Item Name Code

29785

Assigment Date

09/21/2011 (14 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

280.0 millimeters minimum and 444.0 millimeters maximum width, panel, access part name assigned by controlling agency, steel material, 6115-01-561-7718 generator set, diesel engine end item identification, 495.7 millimeters nominal length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Width: 280.0 millimeters minimum and 444.0 millimeters maximum
Length: 495.7 millimeters nominal
End Item Identification: 6115-01-561-7718 generator set, diesel engine
Part Name Assigned By Controlling Agency: panel, access
Material: steel
Material Document And Classification: astm a1008 ds type b or dds assn std single material response
Surface Treatment: paint
Surface Treatment Document And Classification: mil-dtl-53072 mil std single treatment response

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-599-3123?

The FSCG of the NSN 5340-01-599-3123 is 5340

Does NSN 5340-01-599-3123 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-599-3123 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-599-3123 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-599-3123 was assigned to the Federal Catalog?

It was assigned 14 years ago, on Wed, Sep 21, 2011