5340-01-563-7095

Find complete technical information, availability, and procurement data for: 5340-01-563-7095
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-563-7095 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-563-7095

Item Name Code

17532

Assigment Date

05/20/2008 (18 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.276 inches minimum and 0.286 inches maximum diameter, corrosion resistant and heat and hydraulic fluid and flame resistant cushioning environmental protection, 1 plain long tongue integral nut type and quantity, round, unthreaded tongue hole type, 0.497 inches minimum and 0.503 inches maximum overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Integral Nut Type And Quantity: 1 plain long tongue
Cushioning Environmental Protection: corrosion resistant and heat and hydraulic fluid and flame resistant
Overall Width: 0.497 inches minimum and 0.503 inches maximum
Diameter: 0.276 inches minimum and 0.286 inches maximum
End Item Identification: propulsion section assy
Center To Center Distance Between Loop And Mounting Hole: 0.499 inches minimum and 0.529 inches maximum
Loop Inside Diameter: 0.125 inches minimum and 1.500 inches maximum
Part Name Assigned By Controlling Agency: (inavy)clamp, single loop
Material: silicon cushion
Material: steel comp 321 overall
Material Document And Classification: ams-5510 mil spec single material response overall
Style Designator: single loop

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
TA02217H024HA	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-563-7095?

The FSCG of the NSN 5340-01-563-7095 is 5340

Does NSN 5340-01-563-7095 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-563-7095 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-563-7095 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-563-7095 was assigned to the Federal Catalog?

It was assigned 18 years ago, on Tue, May 20, 2008