H975SSW2SS

View detailed technical data, stock status, and sourcing information for: H975SSW2SS
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part H975SSW2SS to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-563-6257

Item Name Code

20353

Assigment Date

05/15/2008 (18 years ago)

A circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see disk, rupturable. For items made of felt, see felt, mechanical, preformed. For metallic or plastic items with a laminated cross section, see shim. Excludes:diaphragm, valve, flat; diaphragm, valve, special shaped; disk, valve, nonmetallic; filtering disk fluid; and insulator, disk.

0.310 inches nominal stock diameter, 2.750 inches nominal plate width, 0.199 inches nominal hole diameter, 4.750 inches nominal plate length, 4.130 inches nominal inside length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.199 inches nominal
Stock Diameter: 0.310 inches nominal
Plate Width: 2.750 inches nominal
Inside Length: 4.130 inches nominal
Plate Length: 4.750 inches nominal
Mounting Plate Style: raised
Handle Clearance: 2.750 inches nominal
Mounting Method: mounting plate
Part Name Assigned By Controlling Agency: (inavy)lifting grapple, 180 degree, heavy duty
Special Features: bail handle altered style in that instead of being rounded it is pentagon shaped, using pointed end for either tie down or hoist lifting; has heavy duty stainless steel return spring, with 180 degree motion; mounting plate is irregularly shaped in that upper portion is smaller in width, 3.830 for a length covering the handle; and the lower portion of the plate is for under the handle to the end of the plate; upper portion has two mounting holes centered 3.000 inches apart and 0.415 inches from outside edges; bottom portion has 3 mounting holes spaced 1.500 inches apart and 0.875 inches from outside edge
Material: steel corrosion resisting handle
Style Designator: d

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
H975SSW2SS	Bail Handle
H975SSW2SS-M	Bail Handle

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-563-6257?

The FSCG of the NSN 5340-01-563-6257 is 5340

Does NSN 5340-01-563-6257 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-563-6257 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-563-6257 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-563-6257 was assigned to the Federal Catalog?

It was assigned 18 years ago, on Thu, May 15, 2008