5340-01-532-9924

Find complete technical information, availability, and procurement data for: 5340-01-532-9924
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-532-9924 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-532-9924

Item Name Code

40136

Assigment Date

08/26/2005 (20 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.135 inches nominal material thickness, end item nsn: 2320-01-447-6343 end item identification, 0.750 inches nominal distance between clamp halves, assebmly consists of: u-bolt p/n: 12484560, qty 2 lock washer p/n: ms35338-140, qty 2 nut p/n: ms51971-2, p/n: 12484548-003, p/n: 12484548-002, p/n: 12484548-001, qty 2 bolt p/n: 12414419-119, qty 4 nut p/n: 12414315-009, qty 2 washer p/n: 12414473-014, and qty 2 lock washer p/n: ms35338-47 special features, 1.015 inches nominal distance from hole center to mounting surface

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Material Thickness: 0.135 inches nominal
End Item Identification: end item nsn: 2320-01-447-6343
Distance Between Clamp Halves: 0.750 inches nominal
Distance From Hole Center To Mounting Surface: 1.015 inches nominal
Special Features: assebmly consists of: u-bolt p/n: 12484560, qty 2 lock washer p/n: ms35338-140, qty 2 nut p/n: ms51971-2, p/n: 12484548-003, p/n: 12484548-002, p/n: 12484548-001, qty 2 bolt p/n: 12414419-119, qty 4 nut p/n: 12414315-009, qty 2 washer p/n: 12414473-014, and qty 2 lock washer p/n: ms35338-47
Material: steel
Material Document And Classification: astm a-653 assn std single material response
Style Designator: open

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-532-9924?

The FSCG of the NSN 5340-01-532-9924 is 5340

Does the NSN 5340-01-532-9924 have a Schedule B code assigned?

Yes, the Schedule B code is 8710000090

Does NSN 5340-01-532-9924 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-532-9924 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-532-9924 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-532-9924 was assigned to the Federal Catalog?

It was assigned 20 years ago, on Fri, Aug 26, 2005