B33F-59

View detailed technical data, stock status, and sourcing information for: B33F-59
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part B33F-59 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-499-9957

Item Name Code

16900

Assigment Date

08/09/2002 (24 years ago)

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1.500 inches nominal first leg length, 1.010 inches nominal second leg width, 2320-01-452-5579 end item identification, plain mounting hole type, 1.630 inches nominal second leg length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Mounting Hole Type: plain
First Leg Length: 1.500 inches nominal
Second Leg Length: 1.630 inches nominal
End Item Identification: 2320-01-452-5579
Second Leg Width: 1.010 inches nominal
First Leg Hole Diameter: 0.380 inches nominal
Second Leg Distance From Edge To Hole Center Along Width: 0.380 inches nominal
Second Leg Distance From Edge To Hole Center Along Length: 0.510 inches nominal
Second Leg Slot Length: 0.620 inches nominal
Second Leg Slot Width: 0.380 inches nominal
First Leg Width: 1.010 inches nominal
First Leg Style: angle
First Leg Hole Arrangement Style: one hole
Second Leg Style: square
Second Leg Hole Arrangement Style: one slot
Second Leg Relationship To First Leg: not identical
First Leg Angle: 90.0 degrees nominal
Part Name Assigned By Controlling Agency: bbo, transmission-dipstick support-md-3060
Material: steel
Surface Treatment: primer and paint
Style Designator: angle

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
33F-59	Angle Bracket
B33F-59	Angle Bracket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-499-9957?

The FSCG of the NSN 5340-01-499-9957 is 5340

Does the NSN 5340-01-499-9957 have a Schedule B code assigned?

Yes, the Schedule B code is 8302500000

Does NSN 5340-01-499-9957 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-499-9957 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-499-9957 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-499-9957 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Fri, Aug 9, 2002