5340-01-492-5465

Find complete technical information, availability, and procurement data for: 5340-01-492-5465
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-492-5465 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-492-5465

Item Name Code

40223

Assigment Date

12/03/2001 (24 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6.230 inches minimum and 6.270 inches maximum length, 5.100 inches minimum and 5.140 inches maximum width, 0.154 inches minimum and 0.161 inches maximum all holes mounting hole diameter, 4 mounting hole quantity, 0.040 inches minimum and 0.080 inches maximum thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Width: 5.100 inches minimum and 5.140 inches maximum
Thickness: 0.040 inches minimum and 0.080 inches maximum
Length: 6.230 inches minimum and 6.270 inches maximum
Mounting Hole Diameter: 0.154 inches minimum and 0.161 inches maximum all holes
Mounting Hole Quantity: 4
Mounting Hole Type: unthreaded
Aperture Width: 3.230 inches minimum and 3.270 inches maximum
Aperture Length: 4.600 inches minimum and 4.640 inches maximum
End Item Identification: 6625-01-321-8998
Features Provided: aperture
Aperture Shape: rectangular
Part Name Assigned By Controlling Agency: plate, isolator
Material: copper
Surface Treatment: tin
Shape: rectangular
Surface Treatment Document And Classification: mil-t-10727 mil spec single treatment response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
1582AS188-1	Mounting Plate

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-492-5465?

The FSCG of the NSN 5340-01-492-5465 is 5340

Does NSN 5340-01-492-5465 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-492-5465 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-492-5465 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-492-5465 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Mon, Dec 3, 2001