7-0541-2

View detailed technical data, stock status, and sourcing information for: 7-0541-2
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 7-0541-2 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-488-9256

Item Name Code

77777

Assigment Date

09/06/2001 (24 years ago)

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

agav criticality code justification, 0.238 inches minimum and 0.243 inches maximum overall width, repeatable release holdback bar- f/a-18 e/f end item identification, 0.485 inches minimum and 0.515 inches maximum overall length, 0.300 inches nominal overall height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 0.485 inches minimum and 0.515 inches maximum
Overall Height: 0.300 inches nominal
Overall Width: 0.238 inches minimum and 0.243 inches maximum
End Item Identification: repeatable release holdback bar- f/a-18 e/f
Criticality Code Justification: agav
Part Name Assigned By Controlling Agency: lock, rod end - holdback assembly
Special Features: material: ams 5659, 15-5 ph cres
Material: steel corrosion resisting
Surface Treatment: passivate

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
7-0541-2	Holdba Rod End Lock

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-488-9256?

The FSCG of the NSN 5340-01-488-9256 is 5340

Does NSN 5340-01-488-9256 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-488-9256 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-488-9256 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-488-9256 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Thu, Sep 6, 2001