5340-01-488-2276

Find complete technical information, availability, and procurement data for: 5340-01-488-2276
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-488-2276 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-488-2276

Item Name Code

17532

Assigment Date

08/23/2001 (24 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.500 inches nominal overall width, round, unthreaded tongue hole type, f/a-22 raptor end item identification, 0.062 inches nominal material thickness, 0.204 inches nominal diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.500 inches nominal
Diameter: 0.204 inches nominal
Material Thickness: 0.062 inches nominal
End Item Identification: f/a-22 raptor
Center To Center Distance Between Loop And Mounting Hole: 1.402 inches nominal
Loop Width: 0.500 inches nominal
Loop Length: 2.000 inches nominal
Distance From Loop Center To Tongue End: 1.621 inches nominal
Special Features: ptfe sodium treated natural cushion
Material: steel comp 302 or steel comp 321 or steel comp 304 band
Material Document And Classification: ams5512 assn std single material response or ams5510 assn std single material response or ams5513 assn std single material response band
Surface Treatment: passivate band
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response band
Style Designator: rectangular

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
NAS1712C12-32K	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-488-2276?

The FSCG of the NSN 5340-01-488-2276 is 5340

Does NSN 5340-01-488-2276 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-488-2276 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-488-2276 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-488-2276 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Thu, Aug 23, 2001