5340-01-488-2272

Find complete technical information, availability, and procurement data for: 5340-01-488-2272
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-488-2272 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-488-2272

Item Name Code

05072

Assigment Date

08/23/2001 (24 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

4.240 inches minimum and 4.276 inches maximum overall length, 0.051 inches nominal material thickness, 3.802 inches minimum and 3.838 inches maximum distance between mounting hole centers, 0.500 inches nominal overall width, f/a-22 raptor end item identification

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 4.240 inches minimum and 4.276 inches maximum
Overall Width: 0.500 inches nominal
Material Thickness: 0.051 inches nominal
Distance Between Mounting Hole Centers: 3.802 inches minimum and 3.838 inches maximum
End Item Identification: f/a-22 raptor
Cushioning Material: unable to decode
Cushion: included
Mounting Pad: not included
Mounting Hole Size: 0.204 inches nominal
Distance Between Base And Inside Of Arch: 0.485 inches minimum and 0.515 inches maximum
Inside Diameter/Arch Length: 2.985 inches minimum and 3.015 inches maximum
Part Name Assigned By Controlling Agency: strap, retaining-cushioned, rectangular, two piece
Material: aluminum alloy 2024
Style Designator: straight arch

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
NAS1677D20-48S	Retaining Strap

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-488-2272?

The FSCG of the NSN 5340-01-488-2272 is 5340

Does NSN 5340-01-488-2272 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-488-2272 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-488-2272 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-488-2272 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Thu, Aug 23, 2001