5340-01-413-7351

Find complete technical information, availability, and procurement data for: 5340-01-413-7351
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-413-7351 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-413-7351

Item Name Code

20354

Assigment Date

05/21/1995 (31 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.500 inches nominal second leg length, 2530-01-305-0028; m109a3e2 end item identification, 0.500 inches nominal first leg length, 0.1046 inches nominal second leg thickness, 0.1046 inches nominal first leg thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

First Leg Length: 0.500 inches nominal
Second Leg Length: 0.500 inches nominal
End Item Identification: 2530-01-305-0028; m109a3e2
First Leg Thickness: 0.1046 inches nominal
Second Leg Thickness: 0.1046 inches nominal
Center Section Height: 3.000 inches nominal
Center Section Thickness: 0.1046 inches nominal
Special Features: channel supplied with 3 holes, 0.437 in. diameter
Material: steel
Material Document And Classification: astm a569 assn std single material response
Style Designator: adjacent angles

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
12553723-1	Double Angle Bracket
ASTM A569	Double Angle Bracket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-413-7351?

The FSCG of the NSN 5340-01-413-7351 is 5340

Does NSN 5340-01-413-7351 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-413-7351 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-413-7351 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-413-7351 was assigned to the Federal Catalog?

It was assigned 31 years ago, on Sun, May 21, 1995