A50TF232

View detailed technical data, stock status, and sourcing information for: A50TF232
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part A50TF232 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-399-6898

Item Name Code

17532

Assigment Date

12/03/1994 (31 years ago)

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

round, unthreaded tongue hole type, 0.057 inches minimum and 0.069 inches maximum material thickness, 1.109 inches minimum and 1.159 inches maximum center to center distance between loop and mounting hole, 0.485 inches minimum and 0.515 inches maximum overall width, 0.198 inches minimum and 0.209 inches maximum diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.485 inches minimum and 0.515 inches maximum
Diameter: 0.198 inches minimum and 0.209 inches maximum
Material Thickness: 0.057 inches minimum and 0.069 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 1.109 inches minimum and 1.159 inches maximum
Distance From Loop Center To Tongue End: 1.317 inches minimum and 1.387 inches maximum
Loop Inside Diameter: 1.413 inches nominal
Environmental Attribute Code: asbestos alternative products
Special Features: lockwire hole
Material: steel comp 321 band
Material Document And Classification: ams 5510 assn std single material response band
Style Designator: offset mount

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
A50TF232	Loop Clamp
J1220G1(NON-ASBESTOS)	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-399-6898?

The FSCG of the NSN 5340-01-399-6898 is 5340

Does NSN 5340-01-399-6898 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-399-6898 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-399-6898 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-399-6898 was assigned to the Federal Catalog?

It was assigned 31 years ago, on Sat, Dec 3, 1994