5340-01-361-5604

Find complete technical information, availability, and procurement data for: 5340-01-361-5604
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-361-5604 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-361-5604

Item Name Code

42202

Assigment Date

07/19/1992 (34 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.035 inches nominal material thickness, 0.324 inches nominal inside diameter, 0.500 inches nominal outside diameter, 0.111 inches nominal distance from centerline to top of internal key, 0.050 inches nominal overall height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Inside Diameter: 0.324 inches nominal
Outside Diameter: 0.500 inches nominal
Overall Height: 0.050 inches nominal
Distance From Centerline To Top Of Internal Key: 0.111 inches nominal
Material Thickness: 0.035 inches nominal
First Key Width: 0.055 inches nominal
Wire Hole Diameter: 0.067 inches nominal
Material: steel comp 4130
Material Document And Classification: sae 4130 assn std single material response
Surface Treatment: cadmium and chromate
Surface Treatment Document And Classification: qq-p-416, type 2, class 2 fed spec single treatment response
Style Designator: plate type

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
S3931232-5	Rod End Locking Retainer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-361-5604?

The FSCG of the NSN 5340-01-361-5604 is 5340

Does NSN 5340-01-361-5604 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-361-5604 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-361-5604 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-361-5604 was assigned to the Federal Catalog?

It was assigned 34 years ago, on Sun, Jul 19, 1992