5340-01-270-4449

Find complete technical information, availability, and procurement data for: 5340-01-270-4449
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-270-4449 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-270-4449

Item Name Code

20815

Assigment Date

01/06/1988 (38 years ago)

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.490 inches minimum and 0.510 inches maximum width, 0.480 inches maximum overall height, 0.430 inches maximum length, 0.100 inches minimum and 0.106 inches maximum hole diameter, 0.016 inches nominal material thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.100 inches minimum and 0.106 inches maximum
Width: 0.490 inches minimum and 0.510 inches maximum
Overall Height: 0.480 inches maximum
Material Thickness: 0.016 inches nominal
Length: 0.430 inches maximum
Hole Quantity: 2
Mounting Method: unthreaded hole
Distance From Loop Center To End: 0.239 inches minimum and 0.279 inches maximum
Loop/Holding Dimension: 0.345 inches minimum and 0.375 inches maximum
Material: steel overall
Surface Treatment: cadmium overall
Style Designator: standoff

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
4521-36-50-2C	Spring Tension Clip

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-270-4449?

The FSCG of the NSN 5340-01-270-4449 is 5340

Does the NSN 5340-01-270-4449 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908630

Does NSN 5340-01-270-4449 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-270-4449 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-270-4449 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-270-4449 was assigned to the Federal Catalog?

It was assigned 38 years ago, on Wed, Jan 6, 1988