5525549

View detailed technical data, stock status, and sourcing information for: 5525549
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 5525549 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-227-1636

Item Name Code

40268

Assigment Date

02/28/1986 (40 years ago)

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

overall length: 0.690 in. nominal; overall height: 0.165 in. nominal; overall width: 0.630 in. nominal; mounting hole diameter: 0.342 in. minimum and 0.354 in. maximum; lock leg length: 0.040 in. nominal; lock leg width: 0.380 in. nominal special features, aisi 302 assn std 1st material response or aisi 304 assn std 2nd material response material document and classification, steel comp 304 material

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Special Features: overall length: 0.690 in. nominal; overall height: 0.165 in. nominal; overall width: 0.630 in. nominal; mounting hole diameter: 0.342 in. minimum and 0.354 in. maximum; lock leg length: 0.040 in. nominal; lock leg width: 0.380 in. nominal
Material: steel comp 304
Material Document And Classification: aisi 302 assn std 1st material response or aisi 304 assn std 2nd material response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
5525549	Synchro Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-227-1636?

The FSCG of the NSN 5340-01-227-1636 is 5340

Does the NSN 5340-01-227-1636 have a Schedule B code assigned?

Yes, the Schedule B code is 8205700090

Does NSN 5340-01-227-1636 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-227-1636 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-227-1636 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-227-1636 was assigned to the Federal Catalog?

It was assigned 40 years ago, on Fri, Feb 28, 1986