5340-01-120-8562

Find complete technical information, availability, and procurement data for: 5340-01-120-8562
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-120-8562 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-120-8562

Item Name Code

60994

Assigment Date

10/24/1981 (44 years ago)

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

25.310 inches minimum and 25.440 inches maximum overall length, 0.031 inches nominal groove depth, 16.875 inches minimum and 17.125 inches maximum groove length, 0.250 inches nominal chamfer length, both ends groove location

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Chamfer Length: 0.250 inches nominal
Groove Length: 16.875 inches minimum and 17.125 inches maximum
Groove Depth: 0.031 inches nominal
Overall Length: 25.310 inches minimum and 25.440 inches maximum
Groove Location: both ends
Drilled Hole Location: both ends
Chamfer Angle: 45.0 degrees nominal
Special Features: 24.12 in. from groove first end to groove second end; two helical u grooves 3.5 min. 3.62 max. in. from end, 4.496 min. 4.498 max. in. dia; helical grooves 1.0 in. pitch, 2.0 in. lead; all grooves 0.078 in. wide; second groove 2.44 min. 2.56 max. in. from each end groove; hole each end 0.327 min. 0.345 max. in. dia, 3.38 in. deep, 1.0 in. center bore by 0.75 in. deep; heat treat to rockwell c45 or 50 for a min. depth of 0.25 in.
Material: steel comp 4340 overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
13222E3737-2	Headless Grooved Rod

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-120-8562?

The FSCG of the NSN 5340-01-120-8562 is 5340

Does the NSN 5340-01-120-8562 have a Schedule B code assigned?

Yes, the Schedule B code is 7326901000

Does NSN 5340-01-120-8562 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-120-8562 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-120-8562 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-120-8562 was assigned to the Federal Catalog?

It was assigned 44 years ago, on Sat, Oct 24, 1981