5340-00-932-6353

Find complete technical information, availability, and procurement data for: 5340-00-932-6353
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-00-932-6353 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-932-6353

Item Name Code

17532

Assigment Date

02/20/1967 (59 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.016 inches minimum and 0.046 inches maximum material thickness, 0.359 inches minimum and 0.391 inches maximum overall width, 0.401 inches minimum and 0.431 inches maximum center to center distance between loop and mounting hole, round, unthreaded tongue hole type, 0.266 inches minimum and 0.296 inches maximum diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.359 inches minimum and 0.391 inches maximum
Diameter: 0.266 inches minimum and 0.296 inches maximum
Material Thickness: 0.016 inches minimum and 0.046 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 0.401 inches minimum and 0.431 inches maximum
Distance From Loop Center To Tongue End: 0.588 inches minimum and 0.620 inches maximum
Loop Inside Diameter: 0.173 inches minimum and 0.203 inches maximum
Material: steel corrosion resisting overall
Surface Treatment: passivate band
Style Designator: offset mount

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
40284-3	Loop Clamp
TA713SS3T	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-932-6353?

The FSCG of the NSN 5340-00-932-6353 is 5340

Does the NSN 5340-00-932-6353 have a Schedule B code assigned?

Yes, the Schedule B code is 7326190000

Does NSN 5340-00-932-6353 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-932-6353 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-932-6353 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-932-6353 was assigned to the Federal Catalog?

It was assigned 59 years ago, on Mon, Feb 20, 1967