5340-00-903-5033

Find complete technical information, availability, and procurement data for: 5340-00-903-5033
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-00-903-5033 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-903-5033

Item Name Code

17532

Assigment Date

01/01/1960 (66 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

round, unthreaded tongue hole type, 0.199 inches minimum and 0.209 inches maximum diameter, 0.358 inches minimum and 0.388 inches maximum center to center distance between loop and mounting hole, 0.359 inches minimum and 0.391 inches maximum overall width, 0.197 inches minimum and 0.204 inches maximum material thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.359 inches minimum and 0.391 inches maximum
Diameter: 0.199 inches minimum and 0.209 inches maximum
Material Thickness: 0.197 inches minimum and 0.204 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 0.358 inches minimum and 0.388 inches maximum
Distance From Loop Center To Tongue End: 0.561 inches nominal
Loop Inside Diameter: 0.110 inches minimum and 0.140 inches maximum
Material: plastic tetrafluoroethylene cushion
Material: steel comp 302 band
Material Document And Classification: mil-s-5059 annealed mil spec single material response band
Surface Treatment: passivate band
Style Designator: offset mount

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
40888-3	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-903-5033?

The FSCG of the NSN 5340-00-903-5033 is 5340

Does the NSN 5340-00-903-5033 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908695

Does NSN 5340-00-903-5033 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-903-5033 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-903-5033 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-903-5033 was assigned to the Federal Catalog?

It was assigned 66 years ago, on Fri, Jan 1, 1960