5340-00-880-8204

Find complete technical information, availability, and procurement data for: 5340-00-880-8204
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-00-880-8204 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-880-8204

Item Name Code

05072

Assigment Date

02/02/1968 (58 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.750 inches nominal overall width, not included cushion, 7.374 inches nominal overall length, 6.624 inches nominal distance between mounting hole centers, 0.110 inches minimum and 0.140 inches maximum material thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 7.374 inches nominal
Overall Width: 0.750 inches nominal
Material Thickness: 0.110 inches minimum and 0.140 inches maximum
Distance Between Mounting Hole Centers: 6.624 inches nominal
Cushion: not included
Mounting Pad: not included
Mounting Hole Size: 0.281 inches minimum and 0.343 inches maximum
Distance Between Base And Inside Of Arch: 2.375 inches nominal
Inside Diameter/Arch Length: 5.500 inches nominal
Material: aluminum alloy 5052 or aluminum alloy 5083
Material Document And Classification: qq-a-318, temper h32 fed spec 1st material response or mil-a-19005, temper h112 mil spec 2nd material response
Style Designator: straight arch

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10886708	Retaining Strap
5340008808204	Retaining Strap

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-880-8204?

The FSCG of the NSN 5340-00-880-8204 is 5340

Does the NSN 5340-00-880-8204 have a Schedule B code assigned?

Yes, the Schedule B code is 7616995195

Does NSN 5340-00-880-8204 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-880-8204 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-880-8204 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-880-8204 was assigned to the Federal Catalog?

It was assigned 58 years ago, on Fri, Feb 2, 1968