5340-00-864-9409

Find complete technical information, availability, and procurement data for: 5340-00-864-9409
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-00-864-9409 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-864-9409

Item Name Code

17532

Assigment Date

01/01/1962 (64 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

steel corrosion resisting band material, 2.880 inches nominal loop inside diameter, mil-s-5059 mil spec single material response band material document and classification, 0.020 inches nominal material thickness, 0.620 inches nominal overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Width: 0.620 inches nominal
Material Thickness: 0.020 inches nominal
Loop Inside Diameter: 2.880 inches nominal
Material: steel corrosion resisting band
Material Document And Classification: mil-s-5059 mil spec single material response band
Surface Treatment: passivate band
Style Designator: t-bolt

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5340-00-329-2022	No Name Available	01/01/1963

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
100-2-62-288	Loop Clamp
320-62-288SH	Loop Clamp
U10-62-288SH	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-864-9409?

The FSCG of the NSN 5340-00-864-9409 is 5340

Does NSN 5340-00-864-9409 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-864-9409 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-864-9409 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-864-9409 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Mon, Jan 1, 1962