5340-00-725-6052

Find complete technical information, availability, and procurement data for: 5340-00-725-6052
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-00-725-6052 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-725-6052

Item Name Code

20815

Assigment Date

01/01/1961 (65 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.011 inches minimum and 0.012 inches maximum material thickness, 0.415 inches minimum and 0.435 inches maximum length, 1.490 inches minimum and 1.510 inches maximum width, 0.102 inches minimum and 0.106 inches maximum hole diameter, 0.480 inches minimum and 0.500 inches maximum overall height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.102 inches minimum and 0.106 inches maximum
Width: 1.490 inches minimum and 1.510 inches maximum
Overall Height: 0.480 inches minimum and 0.500 inches maximum
Material Thickness: 0.011 inches minimum and 0.012 inches maximum
Length: 0.415 inches minimum and 0.435 inches maximum
Distance From Loop Center To End: 0.278 inches nominal
Loop/Holding Dimension: 0.400 inches nominal
Material: copper alloy 170 or copper alloy 172 overall
Material Document And Classification: qq-c-533 fed spec all material responses overall
Surface Treatment: cadmium and chromate overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
6002-54CC	Spring Tension Clip

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-725-6052?

The FSCG of the NSN 5340-00-725-6052 is 5340

Does the NSN 5340-00-725-6052 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908630

Does NSN 5340-00-725-6052 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-725-6052 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-00-725-6052 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-725-6052 was assigned to the Federal Catalog?

It was assigned 65 years ago, on Sun, Jan 1, 1961