5340-00-475-9279

Find complete technical information, availability, and procurement data for: 5340-00-475-9279
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-00-475-9279 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-475-9279

Item Name Code

05072

Assigment Date

06/04/1971 (55 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.531 inches nominal overall length, 0.0253 inches nominal material thickness, not included mounting pad, not included cushion, 0.440 inches nominal overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 0.531 inches nominal
Overall Width: 0.440 inches nominal
Material Thickness: 0.0253 inches nominal
Cushion: not included
Mounting Pad: not included
Special Features: 1 slot 0.283 in. min and 0.293 in. max lg by 0.115 in. min and 0.120 in. max w; 1 slot 0.176 in. w by 0.195 in. min and 0.200 in. lg
Material: copper alloy 670
Surface Treatment: cadmium and chromate

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
546707	Retaining Strap

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-475-9279?

The FSCG of the NSN 5340-00-475-9279 is 5340

Does NSN 5340-00-475-9279 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-475-9279 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-00-475-9279 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-475-9279 was assigned to the Federal Catalog?

It was assigned 55 years ago, on Fri, Jun 4, 1971