TA1720H20T

View detailed technical data, stock status, and sourcing information for: TA1720H20T
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part TA1720H20T to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-202-0257

Item Name Code

17532

Assigment Date

04/06/1973 (53 years ago)

A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).

heat cushioning environmental protection, 0.189 inches minimum and 0.219 inches maximum diameter, 0.485 inches minimum and 0.515 inches maximum overall width, round, unthreaded tongue hole type, 0.029 inches minimum and 0.036 inches maximum material thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Cushioning Environmental Protection: heat
Overall Width: 0.485 inches minimum and 0.515 inches maximum
Diameter: 0.189 inches minimum and 0.219 inches maximum
Material Thickness: 0.029 inches minimum and 0.036 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 1.077 inches minimum and 1.107 inches maximum
Distance From Loop Center To Tongue End: 1.285 inches minimum and 1.315 inches maximum
Loop Inside Diameter: 1.250 inches nominal
Material: plastic cushion
Material: steel comp 302 band
Material Document And Classification: ams 3651 assn std single material response cushion
Material Document And Classification: mil-s-5059 mil spec single material response band
Style Designator: offset mount
Specification/Standard Data: 98897-l5357 manufacturers specification

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5340-00-876-0699	No Name Available	08/01/2007

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
LS7357WSST20	Loop Clamp
TA1720H20T	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-202-0257?

The FSCG of the NSN 5340-00-202-0257 is 5340

Does NSN 5340-00-202-0257 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-202-0257 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-00-202-0257 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-202-0257 was assigned to the Federal Catalog?

It was assigned 53 years ago, on Fri, Apr 6, 1973